Saskatchewan Hydrology 30 PDH Discount Package

In this online engineering PDH course several aspects of open channel flow will be presented, discussed and illustrated with examples.  The main topic of this course is uniform open channel flow, in which the channel slope, liquid velocity and liquid depth remain constant.  First, however, several ways of classifying open channel flow will be presented and discussed briefly.

Flow of a liquid may take place either as open channel flow or pressure flow.  Pressure flow takes place in a closed conduit such as a pipe, and pressure is the primary driving force for the flow.  For open channel flow, on the other hand the flowing liquid has a free surface at atmospheric pressure and the driving force is gravity.  Open channel flow takes place in natural channels like rivers and streams.  It also occurs in manmade channels such as those used to transport wastewater and in circular sewers flowing partially full.

This 2 PDH  online course is intended for hydrologists, civil engineers, hydraulic engineers, highway engineers and environmental engineers.  After completing this course you will have knowledge about the basic nature of flow in open channels and the common ways of classifying open channel flow (laminar or turbulent, steady state or unsteady state, uniform or non-uniform, and critical, subcritical or supercritical).  Practice in the use of the Manning equation for a variety of uniform open channel flow calculations will be gained through several worked examples.

This online engineering PDH course provides information on the hydrologic engineering investigations for the planning and design of reservoir projects.

Part 1 presents the basic hydrologic concepts for reservoirs including reservoir purposes and basic hydrologic concerns and methods.

The water resource system is a system that may consists of reservoirs, power plants, diversion structures, channels, and conveyance facilities that are each constructed for specific objectives and operated together as a system. This system should be designed and operated for the most effective and efficient accomplishment of overall objectives using mathematical models and simulation.

A reservoir is the artificial body of water that forms adjacent to a storage dam. Multipurpose reservoirs are reservoirs that serve more than one purpose including generating hydroelectric power, providing flood control, storing water, enabling irrigation, and providing recreational opportunities.

This online engineering PDH course provides information on the hydrologic engineering investigations for the planning and design of reservoir projects.

Part 2 presents hydrologic data and various analytical methods.

Hydrologic analysis is used to simulate the hydrological process, study the hydrological characteristics and forecast the surface hydrological situation by establishing the water system model. The analysis helps in determining the scope of the flood, showing the runoff pollution sources, and predicting geomorphological change on runoff. Hydrologic analysis is widely used in regional planning, agriculture, disaster prediction, and many other fields and industries.

This online engineering PDH course provides information on the hydrologic engineering investigations for the planning and design of reservoir projects.

Part 3 presents the storage requirements for various project purposes.

In general, reservoir flood storage is considered when flood damage at a number of locations on a river can be significantly reduced by the construction of one or more reservoirs. It is also considered when a reservoir site immediately upstream from one damage center provides more economical flood risk management than local flood risk management works.

Whenever such reservoirs can serve needs other than flood risk management, the integrated design and operation of the project for multipurpose use should be considered. The water stored in the conservation pool can serve many purposes, including water supply, navigation, fish and wildlife, and hydroelectric power. This course covers the storage requirements for various project purposes.

This 7 PDH online course is applicable to civil and environmental engineers as well as others interested in expanding their knowledge on the hydrologic engineering considerations for the planning and design of reservoir projects.

This online engineering PDH course provides information on the hydrologic engineering investigations for the planning and design of reservoir projects.

Part 4 presents the basic hydrologic engineering studies, focusing on spillways and outlet works, dam freeboard requirements, dam-break analysis, channel capacity as well as real estate and right-of-way studies.

Dam failures can be caused by overtopping a dam due to insufficient spillway capacity during large inflows to the reservoir. This often occurs by seepage or piping through the dam or along internal conduits, slope embankment slides, earthquake damage and liquefaction of earthen dams from earthquakes, or landslide-generated waves within the reservoir.

Spillways and outlet works are necessary to provide capability to release an adequate rate of water from the reservoir to satisfy dam safety and water control management of the project. Furthermore, a freeboard protects the dam and embankment integrity from overflow and excessive wave overtopping caused by various factors. This course will cover all of these topics in great detail.

This 3 PDH online course is applicable to civil and environmental engineers as well as others interested in expanding their knowledge on the hydrologic engineering considerations for the planning and design of reservoir projects.

This online engineering PDH course is devoted to the more widely used sharp-crested weir.  The major emphasis is on the calculations used for flow rate over various types of sharp-crested weirs. There is also information about guidelines for installation and use of sharp-crested weirs.

A weir is basically an obstruction in an open channel flow path. Weirs are commonly used for measurement of open channel flow rate. A weir functions by causing water to rise above the obstruction in order to flow over it. Weirs are typically classified as being either sharp-crested or broad-crested.

This 2 PDH online course is intended for hydrologists, civil engineers, hydraulic engineers, highway engineers and environmental engineers. An attendee of this course will gain knowledge about calculations and installation & measurement guidelines for sharp-crested weirs as used to measure flow rate in open channels. Upon completing this course, the student will be prepared to study additional open channel flow measurement topics.

This online engineering PDH course includes a review of the Manning equation, along with presentation of equations for calculating the cross-sectional area, wetted perimeter, and hydraulic radius for flow of a specified depth in a pipe of known diameter. Numerous worked examples illustrate the use of these equations together with the Manning equation to calculate flow rate and velocity, normal depth, minimum required pipe diameter, required pipe slope or full flow Manning roughness coefficient for partially full pipe flow.  A spreadsheet for making partially full pipe flow calculations is included with this course and its use is discussed and illustrated through worked examples.

The Manning equation can be used for uniform flow in a pipe that is partially full, but the Manning roughness coefficient needs to be considered to be variable dependent upon the depth of flow.

This 3 PDH online course is intended for hydrologists, civil engineers, hydraulic engineers, highway engineers, environmental engineers and mechanical engineers.  After completing this course you will have knowledge about the equations for calculating area, wetted perimeter, and hydraulic radius for partially full pipe flow and equations for calculating the Manning roughness coefficient at a given depth to diameter ratio, with a known value of the Manning roughness coefficient for full pipe flow.  Practice in the use of the Manning equation for a variety of partially full pipe flow calculations will be gained through several worked examples.

This online engineering PDH course includes discussion of the Darcy-Weisbach equation and the parameters in the equation along with the U.S. and S.I. units to be used. Example calculations are provided to illustrate the use of this equation together with the Moody friction factor. A spreadsheet for making pipe flow-friction calculations is included with this course and its use is discussed and illustrated through worked examples.

Several kinds of pipe flow calculations can be made with the Darcy-Weisbach equation and the Moody friction factor.  These calculations can be conveniently carried out with an Excel spreadsheet. Many of the calculations require an iterative solution, so they are especially suitable for an Excel spreadsheet solution.

This 3 PDH online course is intended primarily for civil engineers, mechanical engineers, chemical engineers, and environmental engineers.  After completing this course you will be able to make calculations with the Darcy Weisbach equation and the Moody friction factor equations to calculate several different unknown parameters when sufficient input data is provided.  You will also be prepared to use Excel spreadsheets to efficiently make the calculations.

This online engineering PDH ethics course is (1) the study of moral issues and decisions confronting individuals and organizations involved in engineering and (2) the study of related questions about moral conduct, character, ideals and relationships of peoples and organizations involved in technological development (Martin and Schinzinger, Ethics in Engineering).

This course will address the principles of engineering ethics that every engineer is expected to live by when practicing their profession. It will also present unique ethical case studies randomly selected to demonstrate ethical challenges for professional engineers and alternatives to address these challenges.

This 1 PDH online course is applicable to Professional Engineers licensed in the Province of Saskatchewan and who are required to demonstrate continuing professional competency in engineering ethics as a condition of their license renewal. For each renewal period, every licensee must complete at least one (1) professional development hour relative to the principals of professional responsibility, conduct and ethics.