Quebec Mechanical 15 PDH Discount Package 1
Courses in this Package
Thermodynamics (M08-001)
Heat Transfer (M03-001)
Control Valve Basics: Sizing and Selection (M04-034)
This online engineering PDH course discusses the fundamentals of thermodynamics which is the study of the relationship between heat and mechanical work; it is a branch of both physics and engineering science. This course analyzes the effects of changes in temperature, pressure and volume on physical systems at a macroscopic scale. It also explains how energy balances can be performed on facility systems and how efficiency can be calculated.
This 8 PDH online course is applicable to mechanical and chemical engineers, facility operators, maintenance personnel, and other technical staff who are interested in understanding the fundamentals of thermodynamics.
This P.Eng. continuing education course is intended to provide you with the following specific knowledge and skills:
- Understanding thermodynamic properties
- Performing temperature and pressure measurements
- Learning the characteristics of energy, work, and heat
- Understanding thermodynamic systems and processes
- Understanding the change of phase
- Familiarizing with property diagrams and steam tables
- Knowing first and second law of thermodynamics
- Understanding compression processes
In this professional engineering CEU course, you need to review Volume 1 of the Department of Energy Publication DOE-HDBK-1012/1-92, "Thermodynamics" published by the Department of Energy.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course presents the fundamentals of Heat Transfer which is the study of thermal energy in transit due to temperature difference. Heat Transfer is a basic branch in thermal sciences which explains how heat is transferred by conduction, convection and thermal radiation. This course also explains how specific parameters can affect the rate of heat transfer.
This 3 PDH online course is applicable to mechanical and chemical engineers, nuclear facility operators, maintenance personnel, and other technical staff who are interested in understanding the mechanics of heat transfer.
This P.Eng. continuing education course is intended to provide you with the following specific knowledge and skills:
- Learning heat transfer terminology
- Understanding conduction heat transfer
- Understanding convection heat transfer
- Understanding radiant heat transfer
- Performing heat transfer design calculations
In this professional engineering CEU course, you need to review Volume 2 of the Department of Energy Publication DOE-HDBK-1012/1-92, "Thermodynamics, Heat Transfer and Fluid Flow".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course provides an overview of control valve with emphasis on the sizing and selection. Selection of the proper valve involves a thorough knowledge of the process for which it will be used. When implementing a control valve into a process, one must consider not only the appropriate type of valve and its material of construction, but also the correct sizing to ensure it performs its designated task without any adverse occurrences in the system.
Control valves are imperative elements in any system where fluid flow must be monitored and manipulated. A complete control valve is made of the valve itself, an actuator, and, if necessary, a valve control device. The actuator is what provides the required force to cause the closing part of the valve to move and the valve control devices keep the valves in the proper operating conditions; they can ensure appropriate position, interpret signals, and manipulate responses.
This 4 PDH online course is intended for mechanical, instrumentation and process engineers involved in sizing, selecting and applying process control valves.
This P.Eng. continuing education course is intended to provide you with the following specific knowledge and skills:
- Differentiating between various types of valves and the benefits of each
- Understanding the operation of control valve in a control loop
- Learning how to evaluate and apply actuators and positioners for specific applications
- Understanding the basic hydraulics and the relationship between the Cv, flow rate and pressure drop
- Learning how to size valves for any flow condition likely to be found in a process plant
- Learning how to select the proper valve characteristic for a given process
- Understanding how the installed characteristics can match closely to the inherent characteristics
- Knowing the methods to address system performance issues such as cavitation, flashing and chocked conditions
- Understanding the factors influencing the selection of control valves
In this professional engineering CEU course, you need to review the course document titled "Control Valves Basics - Sizing and Selection".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.