Course Provider Biographies

A. Bhatia

Mr. A. Bhatia is an online PDH course provider of continuing education courses for professional engineers.
 
Mr. Bhatia is a graduate engineer with over 20 years of extensive experience in electro-mechanical engineering, procurement and construction industry. He has been involved in setting up grass root projects from zero to commissioning, interfacing with architects, machinery suppliers, vendors for projects nationally and globally. He received 4-years bachelors' degree in Mechanical Engineering from an accredited Delhi university in India.
 
Mr. Bhatia specializes in conceptual design, optimization studies, energy efficient and environmentally responsible system designs for Infrastructure facilities, Green Buildings, Oil & Gas facilities, Power Plants and Metal & Mining. His core strengths are in the following areas:
 
- HVAC, Loss Prevention and Plumbing
- Energy and Environmental Conservation
- Utility Systems (compressed air, water treatment, cooling, power generation, boiler systems, plumbing, etc.)
- Mechanical Equipment (chillers, fans, pumps, conveyors, EOT cranes, DG sets, welding, machining, heat transfer, etc.)
- Electrical and Control Systems (motors, power factor, short circuiting, transformers, AC/DC circuits, etc.)
 
In his current role, Mr. Bhatia provides consulting services to a number of facilities such as airports, commercial buildings, chemical, biomedical and pharmaceutical facilities, power generation, oil & gas, manufacturing, consumer products. Prior to this, he has worked with United Nations led program on energy conservation and clean development mechanism (CDM) jointly with renowned international experts specialized in their sectors. He has vast international experience on various global projects all over the world in US, UK, Australia, Canada and Middle East.
 
Mr. Bhatia has presented technical papers and has drafted nearly 70-energy audit and management reports. He has also published more than 100 technical courses for professional development hours.
 
Courses provided to CEDengineering.ca by Mr. Bhatia are as follows:

Ahmad Hammouz, P.Eng.

Mr. Ahmad Hammouz is an online PDH course provider of continuing education for CEDengineering.com.

Mr. Hammouz holds a Bachelor of Science in Mechanical Engineering from the University of Manitoba, Canada. He is a registered Professional Engineer in Manitoba. He has over 10 years of experience specializing in energy modeling, energy auditing, mechanical building systems design, and mechanical construction management and estimating.

As Principal and Director of Engineering at GSP Engineering, Mr. Hammouz leads efforts in creating sustainable, high-performance building solutions that prioritize energy efficiency and sustainability. In addition to his role at GSP Engineering, he is a Certification Reviewer for the Canadian Green Building Council (CAGBC) for a variety of green building programs, including LEED and Zero Carbon Buildings.

Mr. Hammouz’s professional journey includes significant roles with Siemens, KMC, and other industry leaders, where he gained hands-on experience in building automation, project design, and project management. With a strong background in mechanical construction and building automation, he has managed and executed numerous large-scale projects in these areas. His expertise includes supervising the installation and commissioning of complex mechanical systems in the healthcare and education sectors. In his previous roles with companies like Siemens, he oversaw the installation and commissioning of Building Management Systems (BMS) for large-scale hospitals and schools.

Additionally, Mr. Hammouz’s professional experience involved developing cost estimates throughout detailed assessment of project specifications and engineering drawings for industrial, commercial, and institutional projects utilizing advanced take-off software and has worked on executing projects involving various types of engineering systems including industrial process systems for water treatment plants & lift stations, building automation systems, hydronic heating and cooling systems, commercial refrigeration systems, HVAC systems, plumbing, natural gas and propane systems.

Ahmed Mousa

Mr. Ahmed Mousa is an online PDH course provider of continuing education courses for professional engineers.

Mr. Mousa is the CEO/founder of the Electric Bridge Consulting and 100% Energy Club. He is a consultant, Utility of the Future manager, electrical engineer, adjunct professor, author of four (4) books and PE courses,  coach & speaker with over 16 years of field, planning, design, operations, project management, training, Distributed Energy Resources' (DERs) grid impact, energy efficiency, Demand Side Management/Demand Response (DSM/DR), electric vehicles' (EVs) impact, Voltage VAR Optimization/conservation (VVO/VVC), AMI, transmission & distribution (T&D) load relief/load forecast, emergency response, best practice/benchmarking, smart grid, risk management, IT/OT, climate change mitigation studies, microgrids, DMS/ADMS/DERMS & non-wire alternatives/non-pipe solutions (NWA/NPS) experience in generation, transmission, substations and distribution systems at Con Edison, PSE&G, PEPCO (Henkels & Mc.Coy), and First Energy (JCP&L).

Mr. Mousa serves on the following boards:

•       Smart Electric Power Alliance (SEPA) Research Advisory Council
•       New Jersey Association of Energy Engineers (NJAEE)    
•       Rutgers University Cyber Security                          
•       Pace University Cyber Security              
•       NJIT Industry Advisory board member.          

Mr. Mousa manages the:

•       New Jersey Integrated Distribution Plan (Energy Master Plan).
•       Technical advisor/lead:
•       Clean Energy Future
•       New Jersey Energy Masterplan
•       New Jersey Governor 50/100% renewable mandates by 2030/2050, respectively.
•       New Jersey Governor 600/2,000 MW energy storage mandates by 2021/2030, respectively.
•       New Jersey Governor 3,500/7,500 MW wind mandate by 2030/2035, respectively.
•       Intelligent touchless Substation
•       Microgrids
•       Energy storage
•       NWA/NPS
•       EVs, vehicle 2 grid/home (V2G/V2H), electric buses, residential chargers/DC chargers, e-buses
•       VVO/VVC - Machine Learning
•       Smart home
•       Net zero/near-net zero buildings
•       Asset Lifecycle

Mr. Mousa is the technical lead/adviser for: energy storage/Solar/VVO/DMS/ADMS/Smart Grid/DERs/Microgrid/EVs/Clean Energy Future/AMI/SGIP/SEPA/Georgia Tech NEETRAC.

Mr. Mousa was Con Edison's substation planning manager responsible for the 5/10/20/30 year sub-transmission and distribution load relief plan. He worked at the Energy Control Center. He was the project manager for a SCADA EMS project & President Obama's D.O.E's stimulus grant. He is the recipient of the "ALVA Award for 21st Century Leader" & other awards.

Courses provided to CEDengineering.ca by Mr. Mousa are as follows:

Aleksandr Treyger, P.E.

Mr. Alesksadr Treyger is an online PDH course provider of continuing education courses for professional engineers.
 
Mr. Treyger is a talented, detail-oriented Professional Mechanical Engineer (BS and MS), as well as a Manufacturing and Industrial Engineer with strong educational background in mechanical design, castings, FEA, fluid dynamics and materials supported by field research and professional work experience.  He is a customer-focused, creative, deadline-driven and multi-task-oriented Professional Engineer (licensed in NY and CT since 2007), as well as a Certified Solidworks Professional with background in power plants, foundry, and bio-equipment. Mr. Treyger is also member of the American Society of Mechanical Engineers (ASME).
 
Courses provided to CEDengineering.ca by Mr. Treyger are as follows:

Allen Hughes, P.E.

Mr. Allen Hughes is an online PDH course provider of continuing education courses for professional engineers.
 
Mr. Hughes received a BS and MS in civil engineering from the University of Tennessee and is a licensed Professional Engineer in NC and VA. He is also licensed as a Certified BMP inspector in North Carolina.
 
Mr. Hughes began his engineering career in 1992 at a soil and materials testing firm. In 1997, he established his own firm Piedmont Geotechnical, Inc., PA. In 2006, he established D. Allen Hughes Engineering, Inc., both of which he has managed since their beginnings. Since then he has gained significant experience in the geotechnical investigation, analysis, design, and testing of subsurface conditions and construction materials including soils, concrete, and wood.
 
Courses provided to CEDengineering.ca by Mr. Hughes are as follows:

Amr Abouseif, PMP®, LEED AP®

Mr. Amr Abouseif, MAA, MA, B.Arch., PMP®, LEED AP® BD+C is an online PDH course provider of continuing education for CEDengineering.com.

Mr. Abouseif, holds a Bachelor of Science in Architecture from Misr International University, Egypt and a Master of Science in Landscape Architecture from the University of Sheffield, United Kingdom. He is a registered architect, bringing over a decade of diverse international experience across Canada, Egypt, Qatar, the UK, and China. His expertise spans architecture, Engineering, landscape architecture, and project management, with a strong technical foundation in BIM, construction coordination, and sustainable design.

His career has encompassed roles in design, construction, and project management, working on large-scale developments, hospitality, mixed-use, and institutional projects. He has led multidisciplinary teams, managed complex projects, and contributed to award-winning designs, including first-place finishes in international competitions.

Beyond his professional work, Amr is committed to community engagement through mentorship, digital coaching, and emergency response volunteering. His passion for design excellence, adaptability, and leadership makes him a valuable asset in shaping the built environment.